Aimpoint CompM4 2 MOA with spacer and QRP2 mount

The Aimpoint® CompM4 sight, with low battery compartment, belongs to the CompM4 series sights which are the finest sights Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery!
The scope comes complete with spacer and QRP2 mount.

UNIQUE FEATURES
• High battery compartment
• Compatible with every generation of NVD
• ACET technology allows up to 80,000 hours (over 8 years) of
daytime operation on one AA battery
• Internal voltage regulator allows the CompM4 to be used with
any AA size battery
• 7 NVD settings and 9 daylight settings
• 500,000 hours of use on NVD setting
• 2 MOA dot for close combat and long distance engagement
• Matches perfectly with Aimpoint® 3XMag
• Unequalled light transmission

Mount base is keyed into to the body of the sight to absorb recoil
QRP2 mount incorporated
Mount base screws directly into the sight – no separate sight ring required
Front lens opening is threaded for addition of killFlash® antireflective
device

• Submersible to 150 feet (45 meters)
• Type classified as the U.S. Army’s new M68CCO
Improved adjustment caps are easier to remove and protected
against impact
• Can be used with a carry handle adapter for use on all M16
rifles
• Mechanical switch for speed and reliability

General Specifications
Optical Specifications
Operating principle: Reflex Collimator sight with LED
Optical magnification: 1x
Aiming dot size: 2 MOA
Dot intensity: Visible against a background luminance of 0,1 to 55 000 lx
Optical signature: No optical signature is visible at 10 meter distance, front side, on appropriate settings with NVD 3
Dot color: Peak Wavelength: 650 ± 10 nm
NVD compatible: Yes
Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
Clear aperture: 26 mm
Eye relief: Unlimited

Power Source
Battery type: AA size battery, (rechargeable 1.2V), alkaline/lithium 1,5V or ithium 3-3,7V (acceptable voltage 1,2-5volt)
Battery life – Day time use: 80.000 h continuous (pos. 12 of 16). Responds to >500 000 hours at NVD setting (pos. 4)
Power intensity: 7 NVD and 9 Daylight, of which 1 extra bright

Physical Specifications
Length sight only: 120 mm (4 3/4″)
Length conf: 135 mm (5 5/16″)
Width: 72 mm (2 13/16″)
Height sight only: 60 mm (2 3/8″)
Height conf: 72 mm (2 13/16″)
Weight sight only (incl battery): 268 g (9,4 oz)
Weight conf: 376 g (13,2 oz) incl. Lens Covers, Kill-Flash, Mount, and Spacer
Housing material: High Strength Aluminum
Housing finish and color: Matte black
Housing anodized: Yes
Material mount and spacer std conf: High Strength Aluminum
Surface treatment: Hard anodized, matte
Height of optical axis – sight and mount: 30 mm (1 3/16″) over top surface of Picatinny/Weaver Rail
Height of optical axis – sight, mount and Micro spacer: 39 mm (1 9/16″) over top surface of Picatinny/Weaver Rail
Adjustment: Range ±2 m at 100 meters (±2 yds at 100 yds) in windage and elevation, 1 click = 16 mm at 100 meters = 13 mm at 80 meters = 9/16″ at 80 yds

Environmental Specifications
Temperature range operation: -45°C to 71°C (-49°F to 160°F)
Temperature range storage: -51°C to 71°C (-60°F to 160°F)
Temperature shock: Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
Humidity: Operates despite humidity. Limits: RH: 95%, Temp: 20ºC to 50 ºC, cyclic
Immersion, static: Operates after immersion until temperature is stabilized + 10°C compared to the water. Limits: Depth: 45 m (150 ft.)
Shock: Operable before and after shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction. Functional during exposure (room temperature)
Vibration: Operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min
Chemical resistance: Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD)